What is the processing capacity of the mechanical filter? 0.
What happens when the inlet pressure of the mechanical filter is small, the inlet pressure is only 0.1-0. 2MPa, and how much is the flow rate appropriate? Blockage of imported pipelineOutlet, discharge unfavorable 1. water inlet pressure can only overcome the resistance of the filter element (pressure drop, pressure loss). the resistance of the filter element is related to the filtering accuracy. the higher the accuracy, the greater the resistance, generally, the precision of precision filtration is 0.2um, and the initial resistance of the filter element is 0. 005MPa, the final resistance (that is, the resistance when it needs to be replaced) is 0. 05MPa, so 0.1 ~ The inlet pressure of 0. 2MPa can work normally. 2. after the flow rate is generally selected in the engineering design, the pipe diameter of the pipeline is determined. the flow rate of low-pressure water is generally selected 1 ~ 3 m/s, the flow rate is too low to waste the cost of the pipeline, and the resistance of the pipeline with too high fl