sounds of silence : controlling the home's most common noises - super water absorbent material
The easiest place to reduce or eliminate noise at home is at the source.
Once the noise happens, without major structural changes, it can be difficult or even impossible to get rid of it before it reaches your ear.
If unwanted sounds occur in a room or apartment next to you, it can usually be controlled with the cooperation of people who live in noisy rooms.
If they install the sound-
There are absorbing materials such as carpets, curtains, upholstered furniture and acoustic tiles in the room, and a large part of the sound will stay in the room.
If The Noise Next Door is out of control, you can reduce a bit of annoyance by using sound
However, this method often fails to achieve its purpose.
If it's your house and you want to go to the trouble and cost of installing specially built walls, you can prevent most of the noise.
But if you're in an apartment or if the remodel is impractical, there's not much you can do.
If you are going to buy a house, build a house, or you already own a house, the following advice from the small housing Council is:
The Board of Architectural Studies at the University of Illinois may be helpful.
The design and layout of your home can control the noise.
Quiet Place (
Study, life, bedroom)
Away from the noise source of interference, positioning is not very critical space (
Kitchen, bathroom, utility room)
On the noisy side.
The space with mechanical equipment is best located on the exterior wall.
Pipe riser and chimney for high-rise fixtures should not go through quiet space.
Buffer can reduce noise transmission between spaces.
A bookshelf or storage wall will help isolate a bedroom or study adjacent to the living space.
If the door remains closed, the closet will reduce the noise between the spaces. Back-to-
Better wardrobe after.
The doors to the corridor should be staggered, not relative to each other.
A special type of structure can interrupt the path of sound.
Common examples of unintentional sound paths are cracks at the top or bottom of the wall, power outlets, recessed cabinetsto-
Go back or install in the same bolt space, heating pipe or loft, basement and crawl space.
Very small cracks under or around doors or windows greatly increase the spread of sound.
By using multiple glass panels, the sound transmission through the window can be reduced.
If the thickness of the pane is different, the transmission is further reduced.
Heating and cooling equipment is the main source of noise inside the house.
It should be carefully selected and installed to minimize the sound transmitted from the furnace and piping system.
The pipes of the heating system should not only be wrapped in fiber material, but also in fiber material to reduce vibration.
If the steam system is used, all pipes must be properly tilted to prevent traps, which may be the cause of the noise. Return-
The Grill located near the furnace fan should be treated with acoustics.
The pipe support frame should be lined with elastic materials.
The report on noise control also presents this interesting observation: "There is very little complete silence on our planet.
A cave deep in the Earth, such as the Carlsbad Cave, close to complete silence ---
No light, no life, no wind, no water, no change in temperature, no movement.
Most of us don't want to be there for a long time.
Quiet is pleasant, but silence is not. The normal low-
The level of sound of life around us is a popular voice.
"We are used to the sound level in our environment.
We are no longer aware of certain sounds.
This background sound masks unwanted noise and reduces the level of noise in our consciousness.
Background sound can supplement sound absorption and sound insulation in the effect of reducing noise.