how to look after your tools - best water absorbing material

by:Demi     2019-09-02
how to look after your tools  -  best water absorbing material
Text and photos: Robert houdiff, you rely on your woodworking tools to make a living, so use them every day and you have more opportunities to take care of them.
For woodworking-loving people, tools may be used at will or rarely.
They may not be stored in the ideal place, so when you start using them, you may encounter tools that are rusty, dull, dirty, and neglected.
There is an important job in front of you before you can even put the blade on the wood, so no wonder you will turn back to the TV.
Or, despite the obstacles, you may decide to simply continue to work hard and hope that you will find some decent work in underprepared tools and inadequate workplaces, but by doing so, you miss your hobbies to give you the most fun. For more how-
Travel to www. woodreview. com.
Or check out our YouTube channel.
Cutting wood with a ready tool is a world away from cutting wood with a bad tool and the results are equally different.
So what I'm going to say is that taking care of your tools is closely related to your mindset about carpentry.
For me, my work is one with my tools, because I have the same attitude towards both.
I want the best tool I can afford, adjust to do the best job they can do, and let me do the best job I can.
I want this because I like carpentry and I want to get the greatest pleasure from it.
I'm not a masochist.
I believe to make things as simple as possible
Something particularly unpleasant.
Like most carpentry, I 'd rather use the tool than maintain it, so I 've been working on making it easy to maintain.
I have a special sharpening area and all the stones are ready for immediate use.
I built the house specifically for most of my tools.
It saves them from random damage, and it's almost a pleasure to put together.
I was particularly careful to protect all my sharp edges as I made all the effort to produce them.
This also applies to tools that I don't re-polish, such as my precious rasps and my files.
Simply throw them in a drawer or box, in a drawer or box they rattle on top of each other, a way to shorten their service life.
Rust can be the biggest problem most woodworking workers have when using tools, but only part of the answer --
Apply oil or wax to the tool and wrap it with foil to keep the absorbent material (dessicants)
With tools, etc-
But there is no simple answer.
It is well known that rust is caused by water contact with the surface of the tool.
This happens under certain humidity, temperature and pressure conditions.
If your tool is stored in a place that is easy to rust
Most of the family workshops in the garage seem to be-
You then have two options: leave them there and take some precautions;
Or store them in other places where they won't rust.
In Your House, for example.
If you have to put them in your workshop, or if you also have machines that you want to protect, then you need to change the environmental conditions more or less to mimic the environment at home, or do something about tools (and machine)
Hit the rust directly there.
The most common precaution is to apply oil or rust-proof to the tool, but unless done so, it may not work properly anyway.
I am more inclined to consider long-term storage than in the short term between use.
Then, it is worth doing it correctly, probably with grease, and it is not important to give the tool a wide range of cleaning disadvantages before using it.
Changing environmental conditions is more difficult and may be more expensive, but it is the easiest and most successful way in the long run.
If you can't store your tools in your house, I'll try to create a mini environment for them to stop rust.
A traditional toolbox, with a good seal around the lid, may be enough, although it may also take dry time to heat the air from time to time, to remove the moisture that the workshop will be busy absorbing when it is always wet.
Changing the environmental conditions of the entire workshop is the best solution, but also the most expensive.
First, the space must be properly closed so that the conditions inside and outside can be truly separated.
Batten walls outside, such as areas that often surround the lower part of the old Queensland house, do not block any moisture.
As found in a typical farm shed, iron walls without lining do not appear.
But the good housing itself doesn't seem to be enough as many car garages are closed but can't prevent rust.
Frequent use is one of the best ways to keep the tool rust free.
In addition to the use itself, any lamp you use will also generate heat to help dry the air and reduce moisture.
Air conditioning is also helpful.
In a closed space under the house, improving ventilation may also help if it is dark and cool when not in use.
If you can drain the cool and humid air and replace it with warmer, drier air from the outside, you will significantly reduce the chance of rust.
It is enough to solve the problem by experience alone. Some tools—
For example, the old plane
They must be widely restricted before they can be used.
What I am worried about here is that working does not make the tool work better, but rather makes it easier or better to use.
For example, you can use some sandpaper to soften the sharp edges of the new hardware shop, wooden marker or cutting gauge so that your hands will feel more comfortable.
I used to scrape the paint off the handle of my Pfeil engraving tool and oil them with sand (
I'm definitely not the only one because these tools don't have the paint on the handle right now).
After using it for about 30 years, my engraving tool handle now has a wonderful gloss that feels very smooth in my hands.
I still polish and refuel any new engraving tool handle I bought as well as the handle of the Pfeil cabinet chisel.
I re-grind the tip of any of the old screwdrivers I bought so that they fit the screw slots correctly.
I fix the old saw handle or re-fix the ugly new saw handle to make it look more like the beautiful saw handle on the old saw.
I re-paved the old carving tool mallets so they don't damage the handles of my engraving tool.
You can make new handles from beautiful exotic woods to replace broken handles on old chisels, planes or saws.
These are some of the ways to make your tools better used, better viewed, and better owned.
The most important part of properly maintaining woodworking hand tools so far is to keep them sharp.
The next step is to protect them from random damage, and it is best to be careful to store them in a custom home.
I sometimes find rust on my airplane blades and shredder because they don't dry properly after sharpening on Japanese waterstones.
I always have a hard time removing it with the German Schleiffix grinding block provided by Carba-Tec.
Wet sandpaper and dry sandpaper also work.
I check my squares from time to see if there is burrs at the end of the blade or in the inventory corner (
In the case of all.
Steel engineer Square).
A small Burr may not throw the reading on the wood, but it will have a critical impact on the steel
For example, if you are trying to check the square of the saw or the connection fence.
These burrs can be carefully removed using fine files or some sandpaper.
The soles of the metal aircraft may also be scratched, stung or burped, all of which need to be fixed in the same way.
The Workbench is one of the most important tools in the workshop and needs to be maintained like any other tool.
The countertop needs to be re-laid on a regular basis to clean it up and make sure it is flat.
The wooden sub-claws also need to be re-surface so that they can remain clean and have a good top edge to hold onto the small pieces of wood firmly.
If you have an old record pair, you may need to plane the wooden chin to some sort of cone, so that the work is square with the table surface when caught.
I also like that my wooden sub-claws completely cover the metal claws they attach so that my tools don't accidentally hit any exposed metal.
I made these Wood chins with 50mm thick hardwood floors (
Jarrah, for example)
I tore the wood into two wide boards, cut a cavity from a board with my band saw, instead of taking out the metal sub-chin from the cavity, and then regrouped the board together.
A set of woodworking tools sufficient to make a range of furniture and adjust to do a good job will represent a significant investment in time or money, or both.
It makes sense to take care of them just for this reason.
More important than that, however, is the simple fact that if you want to fully enjoy using them, you need to be able to use them without struggling.
If you can create a workspace that you like and keep your tools well maintained and ready to work, then you are more likely to do your job well.
Line up all or most of these positive things, and they become self-conscious. perpetuating.
If you don't, your carpentry is more likely to be a hard struggle destined to fail.
Robert Howard is a special editor of The Australian Journal of timber review.
This story is reproduced from issue 74.
For more information on how to guide, please visit www. woodreview. com.
Or check out our YouTube channel.
Custom message
Chat Online 编辑模式下无法使用
Chat Online inputting...